Thermo Scientific Lindberg/Blue M Controller for 1200C Furnace 120V - Programmable + OTC
Part Number: CC58114PBA-1
Features of the CC58114PBA-1 Furnace Controller
Control console is fully wired and includes a solid-state power module, ON/OFF circuit breaker and thermocouple input jack
Selectable self-tuning microprocessor-based PID control (proportional, integral, derivative) provides optimum thermal process and prevents overshoot
Programmable with one (1) stored program of sixteen (16) segments. Each segment includes one ramp and one dwell, so you can program 16 ramp/dwell cycles.
The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then hold the temperature at a set level.
An LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F.
The controller can be positioned adjacent to or remote from the furnace, permitting applications in fume hoods or containment areas.
NOTE: Controller must be hard wired
Adjustable digital overtemperature control
Protects furnace and load in the event of primary control circuit failure
Overrides main controller and shuts off power to furnace if high limit is reached
Manual reset required for safety
Operates via magnetic contacts through signal from independent thermocouple
Part Number: HTF55122A
Part Number: HTF55322A