Thermo Scientific Lindberg/Blue M 6L C2 OTC 1500C Box Furnace
Part Number: BF51433BC-1
These Thermo Scientific Lindberg/Blue M multipurpose furnaces feature integral control to 1500°C. Each furnaces has a double-wall construction with Moldatherm insulation for rapid heatup and cooldown, energy efficiency, and cooler exterior surface temperatures.
Features of the BF51433BC-1 Industrial Lab Furnace
Includes the C2 Controller
Programmable with one (1) stored program of sixteen (16) segments. Each segment includes one ramp and one dwell, so you can program 16 ramp/dwell cycles.
The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then dwell (hold the temperature) at a set level for a specified time.
An LED display simultaneously shows both setpoint and actual furnace temperatures.
See bottom of page for more details on controllers.
Selectable self-tuning PID control (proportional, integral, derivative) provides optimum thermal process and prevents overshoot
Control panel designed for easy access and maintenance
Main power ON/OFF switch on control panel
Adjustable high-limit overtemperature protection
Can be configured to display temperature in either °C or °F
Over Temperature Control (OTC)
Adjustable digital overtemperature control
Protects furnace and load in the event of primary control circuit failure
Overrides main controller and shuts off power to furnace if high limit is reached
Manual reset required for safety
Operates via magnetic contacts through signal from independent thermocouple
Silicon carbide heating elements for long-life, safety and reliable service with maximum energy savings
Vertical-Swing Door for convenient operation and full chamber access
Safety door switch interrupts power to heating elements when door is opened; protects elements and minimizes exposure to operator
Moldatherm hearthplate supports load and protects interior from spillage and mishandling
Type "R" thermocouple is integrated into chamber backwall
NOTE: Furnace must be hard wired
About the Controllers C2 and D2
This furnace is available with two different controllers allowing various levels of control and programs. All of the controllers are digital. The BF51433BC-1 has the C2 controller.