Model Number: F6038CM Categories: , , , Tag:

Thermo Scientific Thermolyne D1 Premium Muffle Furnace – 208V

Thermo Scientific Thermolyne D1 Premium Muffle Furnace – 208V

Model Number: F6038CM Categories: , , , Tag:

$8,800.00

Thermo Scientific Thermolyne Premium Large Muffle Furnace features a robust design and a choice of four temperature controller models, making it perfect for industrial applications. This furnace provides a spacious 14L (0.5 cu ft) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis.

Total

Model Number: F6038CM Categories: , , , Tag:

Thermo Scientific Thermolyne Premium Large Muffle Furnace features a robust design and a choice of four temperature controller models, making it perfect for industrial applications. This furnace provides a spacious 14L (0.5 cu ft) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis.

  • Includes the D1 Digital Controller
  • Programmable with four (4) stored program of sixteen (16) segments
  • Each segment includes one ramp and one dwell, so you can create four programs with 16 ramp/dwell cycles.
  • The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then dwell (hold the temperature) at a set level for a specified time.
  • An LED display simultaneously shows both setpoint and actual furnace temperatures.
  • Includes a mechanical overtemperature protection relay
  • RS-232 communications interface also included.
  • Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity
  • Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit
  • Rear of chamber incorporates a 0.38-inch diameter port for monitoring chamber temperatures with independent measuring devices
  • Optional stainless-steel shelf (Part Number SH408X1) doubles load capacity (maximum temperature of 900°C)
  • Door safety switch stops power to heating elements when door opens
  • Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
  • NOTE: No plug, no cable, requires hard wiring

Standard Lead Time: 10 Days

Additional information

Dimensions 20.1 × 19.1 × 21 in
Brand

Part No.

Lead Time

Voltage

Power

Frequency

1 Year Parts and Labor Warranty Details