Thermo Scientific Precision Coliform Water Bath COL 19 - 19 L
Part Number: TSCOL19
Included with Bath
Stainless steel gable cover, diffuser tray, and rubber duck
Precision coliform water baths are designed specifically for fecal coliform determination.
Each water bath is factory calibrated, with later field calibration enabled from the front panel without the need for tools.
Perimeter-directed water flow allows you to achieve enhanced temperature uniformity.
Auto-On and Auto-Off Set a timer in hours and minutes for both a start and finish time. For example, if you want the bath to start in 60 minutes and then turn it off 30 minutes later, set the start time to 1:00 and set the off time to 1:30.
Low Fluid Protection When enabled and the reservoir level nears empty the bath will shut down and, if enabled, the alarm will sound. The controller will also have an error displayed.
Audible Alarms Alarms can be set to sound when reservoir level nears empty, your selected (set point) temperature is exceeded, the fixed high temperature maximum is reached (safety feature), as well as general malfunctions.
Presets Quickly scroll through factory presets 35.0, 41.5, 44.5 and 45.5°C with the push of a button
Adjustable digital over-temperature protection allows you to set a maximum allowable temperature that will trip the alarm
Accommodate taller labware with new hinged lid and extended height
Rugged, high performance baths maintain water temperature with precision
Display in either °F or °C
Over-temperature safety circuitry prevents thermal runaway
Outstanding chemical and corrosion resistance with epoxy powder-coated exterior
Easily clean the chamber with its seamless stainless-steel and coil-free interior
Small footprint to conserve lab space: 24.9"W x 15.5"D
Advanced microprocessor controller is designed for extended functionality
Global Voltage This bath can be used in the US with a 60Hz standard 120V or dedicated 240V outlet. It can also be used internationally at 50Hz and 230V.
Part Number: 3166183
9-3/4 x 8-3/4 x 6-1/4 inches. The Petri dish rack holds 80 x 50 mm Petri dishes or 30 x 90 mm Petri dishes.
Part Number: 3161601
10 x 8-1/2 x 5-1/2 inches. The test tube rack holds 50 test tubes up to 25 mm from 97 to 150 mm high. Openings are 1 inch (25 mm) square.