Home > Water Baths > Discontinued Model 2874

Thermo Scientific 2874 is Discontinued and Replaced by TSSWB15S

The follow accessories are still available for the 2874.

Accessories for 2874

Oxygen / Nitrogen / CO2 Flowmeter

Part Number 3166181. The Oxygen/Nitrogen/CO2 Flowmeter features independent controls that regulate the flow of gas to the sample environment. Permits flow rates from 0 to 10 CFH (0 to 4719 cc/minute).

$935.00

Quantity

Small Gassing Hood for Shaking Baths

Part Number 3162639. The gassing hood permits control over the atmosphere surrounding the sample. It also improves temperature uniformity and reduces energy consumption. Hood is polished stainless steel with a plastic gas fitting. Each bath will accommodate 2 small hoods. Measures 5.6 x 11.35 inches.

$280.00

Quantity

Large Gassing Hood for Shaking Baths

Part Number 3162640. The gassing hood permits control over the atmosphere surrounding the sample. It also improves temperature uniformity and reduces energy consumption. Hood is polished stainless steel with a plastic gas fitting. Each bath will accommodate 1 large hood. Measures 11.21 x 11.35 inches.

$389.00

Quantity

Glass Thermometer 305mm (12in) 0-100C

Part Number 3166220. This non-hazardous glass thermometer reads in 1.0°C increments. It is 305mm (12in) long and read from 0 to 100°C.

$87.00

Quantity

Test Tube Clip for Shaking Baths

Part Number 3166216. Test tube clips are stainless steel and hold 13mm to 25mm tubes. (20) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (48) will fit in model TSSWB27. Each clip requires one fastener (item 3166189).

$105.00

Quantity

25 mL Flask Clip for Shaking Baths

Part Number 3166227. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (20) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (48) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$86.00

Quantity

50 mL Flask Clip for Shaking Baths

Part Number 3166198. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (15) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (36) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$105.00

Quantity

125 mL Flask Clip for Shaking Baths

Part Number 3166221. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (9) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (24) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$86.00

Quantity

250 mL Flask Clip for Shaking Baths

Part Number 3166566. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (6) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (14) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$82.00

Quantity

500 mL Flask Clip for Shaking Baths

Part Number 3166199. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (4) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (12) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$86.00

Quantity

1000 mL Flask Clip for Shaking Baths

Part Number 3166200. Flask clips allow you to secure flasks to the bath platform. The clips are stainless steel. (2) will fit in models TSSWB15, TSSWB15S, and TSDUB15. (5) will fit in model TSSWB27. Each clip requires one fastener (see item 3166189, Package of 25 Clip Fasteners).

$218.00

Quantity

High-Wall Tray for Water Baths

Part Number 3164716. Measures 286 x 318 x 191mm (11.25 x 12.5 x 7.5 in.).

$509.00

Quantity

Microcentrifuge Test Tube Rack for 0.5 mL Tubes

Part Number 3166184. This microfuge test tube rack holds 63 x 0.5 mL tubes. It measures 127 x 101 x 39mm (5 x 4 x 1.5in). Clip Fasteners (item 3166189) are required.

$259.00

Quantity

Microcentrifuge Test Tube Rack for 1.5 mL Tubes

Part Number 3166185. This microfuge test tube rack holds 30 x 1.5 mL tubes. It measures 127 x 101 x 39mm (5 x 4 x 1.5in). Clip Fasteners (item 3166189) are required.

$305.00

Quantity

Package of 25 Clip Fasteners

Part Number 3166189. Clip Fasteners are used to hold flask clips to the bath platform. One fastener is required for each flask clip.

$149.00

Quantity

Test Tube Tray for Shaking Baths

Part Number 3161597. The test tube tray holds 10 test tubes, 13 to 25 mm. Measures 5 x 10.2 inches.

$845.00

Quantity

25 mL Flask Tray for Shaking Baths

Part Number 3161599. This tray holds 18 x 25 mL flasks. Measures 5 x 10.2 inches.

$865.00

Quantity

50 mL Flask Tray for Shaking Baths

Part Number 3166228. This tray holds 10 x 50 mL flasks. Measures 5 x 10.2 inches.

$519.00

Quantity

Gable Cover for Shallow-Form/Dubnoff Shaking Baths

Part Number 3166238. This stainless-steel bath cover prevents cross-contamination by diverting condensation to the sides for return to the bath medium. This also reduces moisture loss and water accumulation on the bench. Fits Shallow-Form Reciprocal Shaking Baths.

$467.00

Quantity

TOP