Thermo Scientific Lindberg/Blue M 17L D2 1700C Box Furnace / NO REPLACEMENT AVAILABLE

Includes the D2 Digital Controller

Programmable with 25 stored programs with 500 segments per program. Each segment includes one ramp and one dwell, so you can program up to 500 ramp/dwell cycles.

The ramp is used to vary the heat-up or cool-down rate to your specified setpoint. The furnace will then dwell (hold the temperature) at a set level for a specified time.

Controller can repeat the whole program up to 999 times

Program patterns can be based on either time or rate

A large 5-digit LED display shows actual temperature

LCD display provides trend recording function, graphic prompts, configurable display data, and custom messages set by the customer.

Selectable self-tuning PID control (proportional, integral, derivative) provides optimum thermal process and prevents overshoot

Control panel designed for easy access and maintenance

Main power ON/OFF switch on control panel

Adjustable high-limit overtemperature protection

Can be configured to display temperature in either °C or °F

Designed for efficient high-temperature use with minimal maintenance

Side swing door provides full and easy access to chamber, protects user from heat surge

Atmosphere port, 0.375in. diameter, for fresh air or inert gas inlet (located at back wall, bottom)

Solid-state power module with ammeter, circuit breaker, transformer and front panel indicator lights for --Ready Element-- and --Main Power Applied--

Safety power disconnect switch cuts power to heating elements when door is opened

Moldatherm high-temperature ceramic fiber insulation with advanced graded design for fast heat-up and resistance to thermal shock

Moldatherm hearthplate supports load and protects chamber from spills or mishandling

High-volume cooling fans move air between inner and outer chamber to reduce exterior shell temperatures and improve energy efficiency and operator safety

Long-life type B thermocouples with 10ft. compensated lead wire and polarized plug for accurate high-temperature measurement

Removable panels for easy access to replaceable heating elements and thermocouples

Molybdenum disilicide elements with unique right-angle bend and sidewall mounting reduce maintenance usually associated with element termination and mounting

Designed for easy replacement without matching resistance values

Fast heat-up and recovery with excellent uniformity and energy efficiency

Increased resistance to thermal shock, ideal for rapid cycling over extended periods

NOTE: Furnace must be hard wired

Catalog (PDF Download)