Thermo Scientific Lindberg/Blue M Vacuum Oven 127.4L - 208-240V
Part Number: VO1824C
Thermo Scientific Lindberg/Blue M Vacuum Ovens offer digital electronic control, built-in over-temperature protection, and a fully flexible vacuum/purge/release system. They are ideal for a range of applications including drying, curing, outgassing, aging, process control and other applications requiring elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres.
Features of the VO1824C Vacuum Oven
Heatup Times: 70 minutes to 100°C, 110 minutes to 150°C, 165 minutes to 200°C, 250 minutes to 260°C
Single setpoint digital microprocessor control, front-mounted.
Simultaneous LED display of setpoint and actual temperature with push-button view
Keypad data entry and pull-out control module for easy service
Independent over-temperature safety system factory set with reset push-button
1-inch (2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source
Inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port
1000 microns (1torr) capacity
Vacuum gauge, vacuum, gas and inlet valves located on front
Corrosion-resistant stainless-steel cabinet chamber
Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source
Low-watt heating element extends oven life
Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door
High-temperature silicone gasket is specially molded for a positive seal
Mechanical latch for positive door seal
Viewing windows permit observation of work in progress without loss of heat
Alert: Ovens are not suitable for use with hazardous vapor. For use with nonflammable, noncorrosive inert gases only.
Part Number: 6718
This heavy-duty, white floor stand includes a door, shelf, latch, and lockable casters. It measures 28.2''H x 27.5''W x 30''D. It is specifically designed to work with all Lindberg/Blue M vacuum ovens (VO914, VO1218, VO1824 series).
Part Number: 118961
This kit includes NW fittings, centering rings, connectors, vacuum clamps, and hose to connect vacuum pump to oven.
Part Number: 305993H01
Includes (1) silicone gasket (red) for use with VO1824A, VO1824C, VO1824SA, VO1824HPC Lindberg/Blue M vacuum ovens.
Part Number: 34637H01
Includes (1) Buna-N silicone-free gasket for use with VO1824A, VO1824C, VO1824SA, VO1824HPC Lindberg/Blue M vacuum ovens. For temperatures up to 150C only.
Part Number: 6827-AVL
Includes (1) vacuum pump for VO1218A, VO1218C, VO1218SA, VO1824A, VO1824C, VO1824SA, VO1824HPC Lindberg/Blue M vacuum ovens. Direct drive, rotary vane mechanical pumps include outlet mist filter, continuous oil return kit, pump oil, 2 meter power cord, rocker switch adjustment for international voltages. Rated 5.9 cfm.