Thermo Scientific Lindberg/Blue M 3-Zone Controller 1200C Furnace - Single Setpoint + OTC

Click for Compatible Furnaces

Features of the CC58434BC-1 Furnace Controller

Control console is fully wired and includes a solid-state power module, ON/OFF circuit breaker and thermocouple input jack

Three microprocessor-based PID controls (proportional, integral, derivative) provide optimum thermal process and prevents overshoot

Single setpoint with one ramp to setpoint.

The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then hold the temperature at a set level.

Thermocouple input jacks for each zone.

An LED display simultaneously shows both setpoint and actual furnace temperatures in either °C or °F.

The controller can be positioned adjacent to or remote from the furnace, permitting applications in fume hoods or containment areas.

NOTE: Controller must be hard wired

Over-temperature Control

Adjustable digital overtemperature control

Protects furnace and load in the event of primary control circuit failure

Overrides main controller and shuts off power to furnace if high limit is reached

Manual reset required for safety

Operates via magnetic contacts through signal from independent thermocouple

Optional Accessories