Thermo Scientific Thermolyne Premium Large Muffle Furnace features a robust design and a choice of four temperature controller models, making it perfect for industrial applications. This furnace provides a spacious 14L (0.5 cu ft) capacity and reaches a maximum of 1200°C, making it ideal for ashing organic and inorganic samples and conducting gravimetric analysis.

• Includes the C1 Digital Controller.
• Programmable with one (1) stored program of eight (8) segments.
• Each segment includes one ramp and one dwell, so you can program 8 ramp/dwell cycles.
• The ramp is used to vary the heat-up rate to your specified setpoint. The furnace will then dwell (hold the temperature) at a set level for a specified time.
• An LED display simultaneously shows both setpoint and actual furnace temperatures.
• A mechanical overtemperature protection relay is also included.
• Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity
• Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit
• Rear of chamber incorporates a 0.38-inch diameter port for monitoring chamber temperatures with independent measuring devices
• Optional stainless-steel shelf (Part Number SH408X1) doubles load capacity (maximum temperature of 900°C)
• Door safety switch stops power to heating elements when door opens
• Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
• NOTE: No plug, no cable, requires hard wiring

Standard Lead Time: 10 Days