Condition	New, Manufacturer Direct-Ship  What's This?
Temp Range	-86°C to -50°C, adjustable in 1°C increments
Size	17.4 Cubic Feet
Dimensions	77.8"H x 37"W x 37"D
Interior	50.5"H x 23.5"W x 25"D
Weight	720 lbs
Warranty	2-Year Parts and Labor
Compressor	3-Year Warranty
Accessories	Tandem Casters, 1 Fixed Shelf, 3 Adjustable Shelves, Door Lock
Capacities	20 racks, 320 2-inch boxes, 240 3-inch boxes
Voltage	115V - Plugs into standard wall outlet Other voltage available upon request

Revco PLUS freezers deliver the best sample protection with advanced refrigeration technology. They guard your samples by combining the highest temperature stability, maximum recovery time and outstanding energy efficiency.

Maximum Temperature Recovery Patented Revco PLUS refrigeration system provides 20% more reserve heat removal capacity for quick temperature recovery after door openings

Energy Efficiency Greater than 15% energy savings and 15% less heat rejection over other leading freezers, Revco PLUS freezers conserve valuable energy resources to keep your lab comfortable and samples protected.

Enhanced Acoustic Insulation With advanced noise abatement technology and insulation, freezers are quieter so they can reside right in your lab. This speeds sample preparation and minimizes sample exposure to ambient air.

Automatic voltage buck/boost system adds longevity to compressors and electronics with voltage stabilization. Buck reduces incoming line voltage if too high. Boost provides additional incoming line voltage if too low.

Alarms and Control Systems

Temperature Alarms: Audible Warning System is activated automatically in the event of temperature deviation

Power Failure Indicator light activated automatically in the event of a power outage

Setpoint security system with key-operated switch for main power and alarm locks in temperature and alarm setpoints

LED Digital Display is clear, easy-to-read and includes touchpad data entry

Visual Warning System for "Clean Filter" and "Alarm Battery Low"

Value PLUS Control Panel

Additional Features of the ULT1786-4

Environmentally friendly DuPont Suva low-stage refrigerants are CFC-Free and specially formulated for ultra low applications

Specifically designed and tested to operate in a rugged laboratory environment without exceeding parameters of any sub-component within the system.

Stainless Steel Shelves are reinforced with stiffeners for excessive loads and impacts, the storage of high-load and non-standard samples, such as microplate hotels.

Door Mounted Pressure Equalization Port (PEP) does not take up valuable storage space and does not require maintenance (ice removal)

Five inner doors create five interior compartments for convenient and organized storage, keeping ambient thermal exposure to a minimum by allowing access to one compartment at a time

Outer Door Gasket secures door seal with five points of sealing contact for ultimate closure efficiency

Cryolatch: Integrated door handle and latch for one-hand operation includes a built-in key lock and is padlock compatible

The robust cabinet is constructed of high-strength steel with a corrosion resistant coating

Rounded interior corners make the freezer easy to clean

1 HP Industrial-grade compressor provides outstanding refrigeration power

A downfeed evaporator provides smoother refrigerant flow

Washable condenser filter maintains peak condenser efficiency by limiting dust build-up

Programmable microprocessor control enables precise temperature settings and flexibility for alarm set points

On-board diagnostics continuously monitors system sensors to ensure proper performance and reports error codes to identify probable cause

Minimum 5" CFC-Free, foamed-in-place polyurethane insulation provider the highest “R” value available for outstanding efficiency

1" diameter access port included for easy access through the wall

Remote Alarm Contacts are included to provide physical connection to an optional external alarm/monitoring system

ULT1786-4 Brochure (PDF Download)

Accessories for ULT1786-4

Delivery Details

Tailgate Delivery The freight company will bring the item to the back of the truck, but you will need to unload it. The product will be packaged and strapped to a pallet. A fork lift is recommended.

Inside Delivery You will be called to schedule an appointment. The delivery crew will unpack the product and carefully place it in your desired location inside your building. All packaging and debris will be removed.

Just a Lift Gate If you do not want an inside delivery but do not have the ability to unload the product from the truck, this delivery method will at least get it to the ground for you. The driver will lower it to the curb. The product will still be packaged and strapped to a pallet.