Thermo Scientific Heraeus Multifuge X3R Refrigerated Benchtop Centrifuge
Breakthrough Technology for Ultimate Performance
CFC Free Refrigeration System
-10°C to +40°C Temperature Range
Pre-Cooling with Direct Button
Achieve 4°C from ambient 23°C in 15 min (with BIOLiner Rotor)
6 x 250 mL - with Fixed Angle Fiberlite F14-6x250LE Rotor
Max RCF (Relative Centrifugal Force)
7164 x g - with Swinging Bucket BIOShield 1000A Rotor
25314 x g - with Fixed Angle Microliter 48x2 mL Rotor
6000 rpm - with Swinging Bucket BIOShield 1000A Rotor
15200 rpm - with Fixed Angle Microvolume Rotors
Learn About the Multifuge X3R
The Heraeus Multifuge X3R centrifuge allows you to accelerate your research by processing up to 40 x 50 mL conical tubes (100% more) in your swing-out rotor, or up to 14 x 50 mL (133% more) in fixed angle configuration, for increased capacity over competitive models in the same bench space.
Unmatched Versatility: The Multifuge X3R offers the industry's broadest range of rotors and adapters available, including Thermo Scientific Fiberlite rotors, enabling a minimum of 23 rotor configurations to meet virtually all processing needs.
Auto-Lock® III Rotor System Secure locking system delivers installation and exchange of rotors with just the push of a button for quick switch between applications. Easy chamber access enables cleaning convenience, reducing contamination risk and leading to improved research and a healthier working environment.
ClickSeal® Bucket Sealing System Innovative biocontainment solution provides simple operation eliminating screw caps and complicated clips; Glove-friendly, one-handed open/close capability; Biocontainment certification by CAMR; Polyetherimide (PEI) sealing covers with high chemical resistance and excellent thermal properties.
SMARTSpin® Technology Advanced rotor management system optimizes acceleration, braking and residual load imbalance for each rotor and bucket option, maximizing safety and improving separation particularly in pelleting applications.
Hybrid Lid Latch Improve closure time and reduce wear with our highly reliable, motorized lid latch system – combining the advantages of mechanical and electromechanical systems. One finger downward motion for easiest closing and locking – even on tall benches. Optional automatic lid opening at end of run for rapid retrieval of samples. Password protection option for sample security, preventing unwanted removal of temperature-sensitive samples.
Compact, Comfortable Design Exceptional capability in compact dimensions maximizes workspace. Ergonomic height and curved design ensure comfortable loading and unloading of samples and cleaning of the unit.
Outstanding Energy Efficiency Up to 40% energy consumption savings on industry standard protocols, such as blood separation or conical tubes processing. Extended tubes capacity significantly reduces the number of runs in high throughput laboratories, and the power saving option optimizes energy usage.
Superior Security Optional password protection, ideal for multi-user environments. For programs: prevents accidental adjustments or removal. To open lid: ensures samples are only removed from the temperature-controlled chamber by the researcher.
Easy to Read and Use Highly visible, backlit display for clear reading of parameters from across the lab. Display of SET and ACTUAL parameters. Multilingual instructions, including English, German, French, Spanish and Italian, on programming, run conditions, alerts and service messages. Glove- and detergent-friendly panel. Convenient keyboard for direct input – without scrolling – of program parameters, reducing preparation time.
Multifuge X3R Panel Features
Program Keys 5 direct access, plus folder with additional storage of 94 programs
Acc / Dec Choice of 9 acceleration and 10 deceleration rates
Speed Control Immediate toggle between RCF and speed control
Bucket Quickly adjust rotor parameters for accurate RCF calculation
Dual Temperature Mode
Temp: Control temperatures between -10°C and +40°C.
Air/Chamber Temperature: For most of the temperature-tolerant protocols. For efficient and stable precooling of the chamber and rotor, prior to temperature-sensitive runs.
Sample Temperature: For accurate control of the sample temperature during the run, independent from the rotor, speed, and environmental conditions.
Dual Timing Mode Set time in hrs.min, min:sec or continuous mode.
At-Start: Standard timing down from pushing Start button--for routine, non-critical runs when reproducibility is not required.
At-Speed: For ultimate replication of results--Timing begins at operating speed for specific run time required (no variation due to changes in acceleration time to operating speed)
Pulse Ideal for short runs
Open Motorized with optional automatic operation
TX-750 High Versatility Swinging Bucket Rotor
The TX-750 delivers maximum flexibility at 4700 rpm and features a choice of round or rectangular buckets with multiple adapters as well as microplate carriers. Adapters for all tubes and bottles from 1.5 to 750 mL,.
BIOLiner High Capacity Swinging Bucket Rotor
The BIOLiner significantly improves productivity by processing over 40% more 50 mL tubes or 100% more blood tubes with biocontainment sealing per run than with competitive models. Adapters for all tubes and bottles from 1.5 to 750 mL.
BIOShield 1000A High Speed Swinging Bucket Rotor
The BIOShield 1000A runs frequently used tubes with the confidence and simplicity of a single, certified biosafety lid. Adapters for all tubes and bottles from 1.5 to 250 mL.
HIGHPlate 6000 Microplate Swinging Bucket Rotor
The HIGHplate 6000 is for filter plate users, ideal for DNA purification protocols, delivering more than 6000 x g and meeting the needs of several filtration devices.
Fiberlite H3-LV Carbon Fiber Microplate Swinging Bucket Rotor
The Fiberlite H3-LV is perfect for pelleting cells and cellular debris, protein precipitation, plasmid purification and collecting physiological fluids for diagnostic tests. In addition, achieve high-volume microplate processing.
Fiberlite F14-6x250LE Carbon Fiber Fixed Angle Rotor
The Fiberlite F14-6x250LE is ideal for pelleting bacteria or yeast cells at above 14000 x g, and for purifying.
Fiberlite F15 6x100 Carbon Fiber Fixed Angle Rotor
The Fiberlite F15 spins 94 mL and 100 mL tubes directly and a variety of 1.5 to 50 mL tubes with adapters. It offers a durable design for general purpose pelleting of organelles, density gradients, and various protocols requiring angle centrifugation of disposable conical tubes.
Fiberlite F13-14x50c Carbon Fiber Fixed Angle Rotor
The Fiberlite F13-14x50c spins 50 mL tubes directly and 15 mL tubes with adapters. It is ideal for pelleting prokaryotic and eukaryotic cells from cell cultures; and, with our generous 14-place capacity and high maximum RCF, features more than double the throughput of an industry standard rotor.
Fiberlite F15-8x50c Carbon Fiber Fixed Angle Rotor
The Fiberlite F15-8x50c spins 50 mL tubes directly and 15 mL tubes with adapters. It achieves more than 24000 x g and is ideal for pellet cells, bacteria, subcellular fractions, and small amounts of nucleic acids and viruses in disposable conical tubes.
Fiberlite F21 48x2 Carbon Fiber Fixed Angle Rotor
The Fiberlite F21 spins 2 mL tubes directly and 0.2, 0.25, 0.5 mL tubes with adapters. It offers a perfect blend of capabilities to support micro-volume protocols, such as nucleic acid or protein lysate preparation and PCR reaction set-up.
HIGHConic II Sealed Aluminum Fixed Angle Rotor
The HIGHConic II spins 94 mL tubes directly and a wide range of tubes from 1.5 to 50 mL with adapters. All processing is done in certified sealed conditions.
Microliter 48x2 Sealed Aluminum Fixed Angle Rotor
The Microliter 48x2 spins 2 mL tubes directly and 0.2, 0.25, 0.5 mL tubes with adapters. It offers a perfect blend of capabilities to support micro-volume protocols, such as nucleic acid or protein lysate preparation and PCR reaction set-up. The included certified biosafety lid assures all samples are safe from contamination.
Free Delivery to Dock or Curb If you don't need or want an inside delivery, we will ship to your dock or curb. The freight company will lower the product to the ground or you may remove it with your equipment. The product will be packaged and strapped to a pallet.
Inside Delivery You will be called to schedule an appointment. The delivery crew will unpack the product and carefully place it in your desired location inside your building. All packaging and debris will be removed.